Skip to the guide

Industrial networking

Phoenix 2902318 at 5 V or Belden 3079A at 150 Ohm

Use 2902318 for the D-SUB plug at 5 V and 100 mA. Use 3079A for the PROFIBUS DP cable at 150 Ohm and 2.3 A.

Rust Belt Industrials · October 24, 2026 · 5 min read

On this page

Use Phoenix Contact 2902318 when the part is the D-SUB plug SUBCON-PLUS-PROFIB/90/M12. As of October 24, 2026, that page lists nominal voltage UN of 5 V, nominal current IN of 100 mA, and degree of protection IP40. Use Belden 3079A when the part is the PROFIBUS DP cable. As of the same day, that page lists 150 Ohm and 2.3 A per conductor at 25°C. The plug current and the cable current are ratings of two parts. Pin assignment for the bus and the 150 Ohm cable construction are on the DP and PA page.

2902318 is a 9-position D-SUB with two B-coded M12 glands

As of October 24, 2026, item 2902318 is a D-SUB plug, 9-position, pin, assignment 3, 5, 6, and 8, with two 90° M12 cable glands, B-coded. One connection is an M12 male, B-coded. The other is an M12 female, B-coded. The bus system is PROFIBUS DP up to 12 Mbps, and the signal line says PROFIBUS. Termination is by a separate M12 terminator. The page does not print a resistor value or a terminator item number, so the request names the terminator from the page that prints it. The product description says the SPEEDCON lock on the M12 connections takes half a turn. The application note says the part is for industrial use.

Electrical properties on the page opened October 24, 2026 are nominal voltage UN 5 V and nominal current IN 100 mA. Mechanical data lists fixing screws 4-40 UNC and a tightening torque of 0.4 Nm. The connection-data cell also ends at 0.4 Nm. Housing material is polyamide, color black (RAL 9005). Width is 16 mm, height is 40 mm, and length is 71 mm.

Ratings that keep the plug and the cable on separate lines, from pages opened October 24, 2026.
ItemPhoenix 2902318Belden 3079A
What it isD-SUB plug, two B-coded M12 glandsPROFIBUS DP cable, one pair
Electrical rating5 V, 100 mA150 Ohm, 2.3 A per conductor at 25°C
Enclosure or jacketIP40, polyamide, 16 x 40 x 71 mmPVC jacket, OD 0.315 in (8.00 mm)
TemperatureOperation -30°C to 80°COperating -30°C to +75°C
Bus rate on the pagePROFIBUS DP up to 12 MbpsThe title names PROFIBUS DP

IP40, temperature, shock, and the commercial line

As of October 24, 2026, degree of protection for 2902318 is IP40. Operation is -30°C to 80°C. Storage and transport are -40°C to 85°C. Assembly is -20°C to 80°C. Humidity in operation is 10% to 95%, non-condensing. Humidity in storage and transport is 5% to 95%, non-condensing. Altitude is listed up to 5000 m, with restrictions referred to the manufacturer's declaration. That declaration was not opened. Vibration per EN 60068-2-6 and IEC 60068-2-6 is operation at 5 g, 10 to 150 Hz, 2.5 h, in XYZ direction. Shock per EN 60068-2-27 and IEC 60068-2-27 is operation at 15 g, 11 ms, half-sine. The coating line cites VDMA 24364:2018-05.

Commercial data on the same page, as of October 24, 2026, lists packing unit 1 pc, minimum order quantity 1 pc, GTIN 4046356654975, weight including packing 66.4 g, weight excluding packing 41 g, and country of origin CN. Sales key DN10, product key DNC531, and customs tariff number 85366990 are also on that block. MTTF is printed three ways under SN 29500: 6706 years at 25°C and a 21% operating cycle, 1817 years at 40°C and 34.25%, and 155 years at 40°C and 100%. The buying split on this page is 5 V and 100 mA against the cable's 150 Ohm and 2.3 A. MTTF does not choose the cable.

3079A supplies the cable ratings the plug page leaves off

As of October 24, 2026, Belden 3079A is one 22 AWG solid bare-copper pair, foam polyethylene, red and green, with a 100% tape and a 65% tinned-copper braid. Characteristic impedance is 150 Ohm. Maximum current is 2.3 A per conductor at 25°C. Nominal jacket diameter is 0.315 in (8.00 mm). UL voltage is 300 V (CMG, PLTC) and 600 V (AWM 20201). Operating temperature is -30°C to +75°C. The rest of that construction, including the 120 Ohm RS-485 cable 9841, is on the 120 Ohm and 150 Ohm page. 2902318's technical data does not include an AWG cell, so wire range on the request comes from the cable page.

What to copy onto the plug line and the cable line

  • Plug: 2902318, SUBCON-PLUS-PROFIB/90/M12, checked October 24, 2026.
  • Plug ratings: 5 V, 100 mA, IP40, assignment 3, 5, 6, 8.
  • M12 ends: one B-coded male and one B-coded female, 90° glands, SPEEDCON half a turn.
  • Torque: 0.4 Nm on the 4-40 UNC fixing screws.
  • Cable: 3079A, 150 Ohm, 2.3 A per conductor at 25°C, OD 0.315 in (8.00 mm).
  • Terminator: a separate M12 terminator. The 2902318 page does not print its item number.

PROFIBUS D-SUB note

Copy the plug ratings and the cable ratings from the pages you are using.

This prepares a request. It does not send one.

Questions these two pages answer

Is 100 mA the cable current?

100 mA is nominal current IN on 2902318, as of October 24, 2026. 2.3 A per conductor at 25°C is the maximum current on 3079A. A bill of material that uses both parts keeps both numbers, each on its own line.

What ingress rating does the plug page print?

The degree of protection on 2902318 is IP40, as of October 24, 2026. The M12 glands are B-coded. The housing rating on that page is the IP40 cell.

Where is the wire range?

The 2902318 technical data opened October 24, 2026 prints voltage, current, torque, and dimensions. Gauge and impedance are on 3079A: 22 AWG solid bare copper and 150 Ohm. DeviceNet Thick and Thin are a different pair of cables, on the 3082A and 3084A page.

Sources

Voltage, current, IP40, assignment, gland coding, dimensions, torque, environmental tests, and commercial data are from the Phoenix Contact 2902318 page. Impedance, cable current, jacket diameter, and the pair construction are from the Belden 3079A page. Both were opened October 24, 2026. The altitude declaration and the M12 terminator item were not on the pages used for the ratings above.