Industrial networking
Belden 3079A vs PROFINET Type A: Impedance and Pairs
Use 3079A at 150 Ohm for one PROFIBUS DP pair. Use LAPP 2170891 at nom. 100 Ω for a 2 x 2 AWG22/1 PROFINET Type A cable.
On this page
Use Belden 3079A when the port is PROFIBUS DP and the cable is one solid 22 AWG pair at 150 Ohm. Use LAPP article 2170891, ETHERLINE PN Cat.5e Y, when the port is PROFINET Type A fixed installation and the cable is 2 x 2 x AWG22/1 at a nominal impedance of 100 Ω according to IEC 61156-5. As of October 23, 2026, 3079A's outer diameter is 0.315 in (8.00 mm) and 2170891's outer diameter is 6.3 mm. The DP and PA page separates 3079A from a PA cable. The type page separates Type A, Type B, and Type C. This page is the DP cable against one Type A article.
3079A is one pair at 150 Ohm
Belden prints one pair, 22 AWG, solid bare copper, foam polyethylene insulation, color code red and green, foil plus a 65 percent tinned-copper braid, and a PVC jacket. Characteristic impedance is 150 Ohm. Operating temperature is -30°C to +75°C. UL voltage is 300 V for CMG and PLTC, and 600 V for AWM 20201. Maximum current is 2.3 A per conductor at 25°C. Stationary bend radius is 2.4 in (61 mm). Violet and chrome are put-up colors for the same product number family: 3079A 0071000 is a violet 1,000 ft reel, and 3079A 0601000 is a chrome 1,000 ft reel.
PI Type A for DP, Table 1-3, is 135 to 165 ohm at 3 to 20 MHz and solid core AWG 22/1. Belden's 150 Ohm and 22 AWG solid pair are the cells that sit with that row. The Belden application line also names Profibus PA. PA impedance is a different cable, covered on the DP and PA page. For this comparison, 3079A is the DP construction at 150 Ohm.
2170891 is 2 x 2 AWG22/1 at nom. 100 Ω
The LAPP Type A page describes an Industrial Ethernet cable Cat.5 for fixed installation, for PROFINET applications type A, design 2 x 2 x AWG22/1. Article 2170891 is ETHERLINE PN Cat.5e Y, core diameter 1.5 mm, outer diameter 6.3 mm, copper index 30.4 kg/km, weight 56 kg/km. Article 2170893, ETHERLINE Y FC Cat.5, and article 2170879, ETHERLINE TRAY ER PN Y FC, are the same 2 x 2 x AWG22/1 with an outer diameter of 6.5 mm. Article 2170933, ETHERLINE PN Cat.5e YY, is 2 x 2 x AWG22/1 with an outer diameter of 7.7 mm and is the row marked suitable for outdoor use. Characteristic impedance for the family on this page is nom. 100 Ω according to IEC 61156-5. Peak operating voltage is 125 V, and the page says that figure is not for power applications.
Product makeup is solid bare copper wire AWG22, PE core insulation, a star quad, an overall screen of copper braid and plastic-laminated aluminium foil, and a PVC outer sheath. Colour is green, based on RAL 6018. The outdoor version is black, similar to RAL 9005, which is the note next to the 7.7 mm article. The page says 2-pair performance is 10/100 Mbit/s for Industrial Ethernet, and that the cable is suitable for EtherCAT and EtherNet/IP applications. That EtherCAT sentence is an allowance on this PROFINET Type A page. It does not change 2170891 into the Beckhoff yellow cable on the ZB9013 page. Core colors are not printed on this LAPP page. Pair colors are on the pair-color page.
| Item | Belden 3079A | LAPP 2170891 |
|---|---|---|
| Network on the page | Profibus DP, and the application line also names PA | PROFINET Type A, fixed installation |
| Construction | 1 pair, 22 AWG solid | 2 x 2 x AWG22/1, star quad |
| Impedance | 150 Ohm | nom. 100 Ω acc. to IEC 61156-5 |
| Outer diameter | 0.315 in (8.00 mm) | 6.3 mm |
| Jacket | PVC, violet or chrome put-up | PVC, green based on RAL 6018 |
| Conductor colors printed | Red and green | Not printed on this catalog page |
| Voltage cell | 300 V CMG/PLTC, 600 V AWM 20201 | 125 V, not for power applications |
Which port takes which cable
A PROFIBUS DP port that specifies Type A impedance takes 3079A's one pair at 150 Ohm, with red and green insulation and a B-coded M12 when the connector section of the PI guideline is in use. A PROFINET port for a fixed run takes a Type A article. 2170891 is the 6.3 mm green article. 2170893 and 2170879 are the 6.5 mm articles. 2170933 is the 7.7 mm article in the outdoor row. All four print 2 x 2 x AWG22/1. None of them print 150 Ohm. A green jacket is on the standard makeup and also appears on other PROFINET types, which is why the type page says the jacket color does not choose Type A by itself. Here the catalog row already says Type A and fixed installation.
Outer diameters of 8.00 mm and 6.3 mm are both on the pages and are not a reason to treat the cables as substitutes. The pair count is one pair against two pairs. The impedance is 150 Ohm against nom. 100 Ω. Temperature on 3079A is -30°C to +75°C. The LAPP Type A page says the temperature range is on the data sheet, and this catalog page does not print a degree range, so the request leaves LAPP temperature blank until that sheet is the one in hand.
What to copy onto the request
- Port: PROFIBUS DP or PROFINET Type A fixed.
- Part: 3079A with the violet or chrome put-up, or LAPP 2170891, 2170893, 2170879, or 2170933.
- Impedance: 150 Ohm, or nom. 100 Ω.
- Pairs: 1 x 22 AWG solid, or 2 x 2 x AWG22/1.
- Outer diameter from the row: 0.315 in, 6.3 mm, 6.5 mm, or 7.7 mm.
- Jacket color from the page that belongs to that part.
Questions these two catalog pages answer
Is 150 Ohm inside a 100 Ω PROFINET spec?
LAPP prints nom. 100 Ω according to IEC 61156-5 for the Type A family. Belden prints 150 Ohm for 3079A. PI's DP window of 135 to 165 ohm is the window for the DP cable, not a window that includes the PROFINET cell.
Does the EtherCAT sentence on the LAPP page make 2170891 a DP cable?
The LAPP page says the cable is suitable for EtherCAT and EtherNet/IP. It still titles the product PROFINET Type A and prints 2 x 2 x AWG22/1 at nom. 100 Ω. DP remains the 150 Ohm pair on 3079A.
Is every green PROFINET article 6.3 mm?
2170891 is 6.3 mm. 2170893 and 2170879 are 6.5 mm. 2170933 is 7.7 mm and sits in the outdoor row, whose sheath note is black. Copy the article number with the diameter.
Sources
3079A construction, impedance, diameter, colors, temperature, and voltage are from the Belden page. Type A articles, impedance, diameter, sheath color, voltage, and the EtherCAT sentence are from the LAPP catalog page. The DP impedance window is from PROFIBUS Interconnection Technology Version 1.4. All three were opened October 23, 2026. Bend radius and a degree range for the LAPP Type A family were labeled see data sheet and were not copied.